CuGoV4 FAQ

Basic Information

QWhat kind of product is this?
A
This is a development platform for electric crawler robots with a built-in control unit.
It supports RC (radio control) operation and programmed driving, as well as the development of control via external devices.
QWhat is it used for?
A
It can be used for RC driving of crawler robots or as the drivetrain for mobile robots.
QWhere can it be used?
A
It can be used indoors as well as on rough terrain such as agricultural fields and construction sites.
QWhat is the lead time?
A
Current lead time: Approximately 1 month after order confirmation. Please contact us if you need it urgently.
QHow many units have been sold?
A
The series has a cumulative sales record of over 1,000 units.

Performance & Specifications

QIs it waterproof?
A
It has an IP65-equivalent waterproof rating.
QWhat is the load capacity?
A
80 kg when two units are connected.
QWhat is the travel speed?
A
The maximum speed is 1.8 km/h.
QWhat is the maximum climbing angle?
A
It can climb slopes of up to 20 degrees.
QWhat is the maximum step height it can overcome?
A
It can overcome steps of up to 9 cm.
QWhat is the power supply voltage?
A
The rated voltage is 24V.
It can be connected to a 24V battery system.
QWhat type of motor does it use?
A
It is equipped with a brushless DC motor by Oriental Motor Co., Ltd., with a rated output of 100W at the motor shaft.
QWhat are the advantages of a chain-type crawler?
A
It offers superior mechanical efficiency compared to rubber belt-type crawler tracks.
When carrying the same load, less motor torque is required compared to rubber belt-type crawlers.
QWhat are the track shoes made of?
A
They are made of rubber.
QWhat is the service life of the track shoes?
A
125 hours of continuous operation.
※ Based on test results of repeated pivot turns on concrete.

Operation & Control

QHow do I operate it?
A
It can be operated using an RC transmitter.
You can also program the onboard Raspberry Pi Pico for autonomous driving or PC-based control.
QWhich RC transmitter does it use?
A
It uses the MC-8 and MR-8 by Kondo Kagaku.
QCan other RC transmitters be used?
A
Yes, but the transmitter settings must be configured by the user.
QCan it be switched to single-stick operation?
A
The MC-8 does not support this. Please consider a third-party transmitter that supports mixing.
QWhat is the wireless communication range of the RC transmitter?
A
Depending on the environment, the range is approximately 30 to 40 meters.
QWhat is the wireless communication frequency?
A
2.4 GHz.
QCan it drive autonomously?
A
With the unit alone, only basic programmed driving is possible.
By attaching an external device such as a PC, it can serve as the drivetrain for a robot capable of advanced autonomous navigation.

Support & Maintenance

QCan I request customization of the crawler unit (e.g., length changes)?
A
We do not offer unit-level customization or specification changes for the CuGo series.
QWhat should I do if it breaks down?
A
Please contact your reseller, purchase the faulty part from us, and carry out the repair.
In the case of initial defects, we offer free warranty replacement within 1 year of purchase.
QHow should I perform maintenance?
A
Remove any debris from the chain, sprockets, and other components, then apply lubrication.
QAre drawing data available?
A
3D data is available. You can download it from the Downloads section.